Wednesday, September 14, 2011

Framing a builder grade mirror that is not between two walls

I promised quite a while ago that I would give directions on how to frame a builder grade mirror that is not tight between 2 walls (like my first post here).

My daughter's bathroom has a mirror on a long wall and we needed to find a way to conceal the mirror when looking at it from the side (since the frame sits on top of the mirror).
In my master ensuite bathroom our mirror is fitted tight between two walls, so we adhered the frame directly onto the mirror.

We used the generally the same materials and mostly the same method to create this frame. For detailed instructions on how we made this mirror frame, please refer to this original post.

I am only going to show you how this frame differs from the original post.

This frame was much more difficult for my husband to create. We could not just create a frame with straight cuts and not have to worry about how the molding was finished on the sides. Since the frame is adhered to the mirror, we had to determine a way to hide the mirror when looking at it from the side and we also had to finish the crown molding and flat trims (making it into a 90 degree corner) so that it was finish nicely.
We used a smaller crown molding for the top because the bathroom light was tighter to the top of the mirror and we did not think we had room for a large, detailed piece of molding.
In order to hide the side of the mirror, we measured the depth of the mirror and purchased a thin piece of molding that was the exact depth of the mirror. We painted it to match the frame, cut 2 pieces to be the exact height of the mirror and secured them onto the wall on both sides of the mirror.
Using the same techinique as we did in the first post, we created the rest of the frame.

Once the frame was secured, we used some filler (like DAP or caulking) to fill in the seams between all the pieces used to create the frame. This gave the frame a nice finished look. It made the frame look like 1 piece and not a bunch of little pieces stuck together.

The hardest part by far was getting the angles for the crown molding and flat trim. If you search online you can get the exact cutting angles needed to achieve a perfect corner. Remember though, the caulking can hide errors :) ...this we know first hand.

Please let me know if you have any questions. Enjoy!
Stephanie

Monday, September 12, 2011

I'm back...well sort of

Thank you to everyone who emailed me with questions and comments over the past couple of months while I was AWOL. I am sorry for not replying to anyone; I have not lost interest or forgetting about Full of Great Ideas. I have had a few things come up that have taken 100% of my time.

As you know, I went to San Fransisco for two and a half weeks at the beginning of August for a family vacation. We had a fantastic trip and got to enjoy my brother's beautiful outdoor wedding while we were there.

Unfortunately, while I was away, I managed to catch a lovely 'bug' and get really ill. Thankfully I made it home (100% medical coverage) when the symptoms decided to knocked me down for the count. After many tests and 4 days in hospital, I was diagnosed with a horrible case of bacterial pneumonia. This was the best diagnosis I could have hoped for because when I was hospitalized, they thought I had a blood clot in my lungs. So far I have been in bed for over 2 weeks with at least another week ahead of doing nothing.  I am starting to feel better but can't sit or stand for too long.Therefore, no blogging for a few more days.

I have to say staring at my house for hours a day is inspiring me to make some huge changes. Unfortunately, I just need to wait until my body will cooperate.

Have any of you ever had this? I hear about people with pneumonia but never expected it to be so severe.

I hope to have something to share with you soon.
Stephanie

LinkWithin

Related Posts Plugin for WordPress, Blogger...
Blogging tips